Bill of Materials:
19" length of 1" wide x 1/8" thick aluminum strap
5/16" x 2" clevis pin
5/16" speed nut
1. Drill a centered hole for the pin at 13/16" from on end of the aluminum piece.
2. Make a mark about 9" from the end with the clevis
3. Carefully bend the bracket around an approximately 2-1/2" outer diameter pipe until the ends are about 10-1/4" apart.
4. File the ends of the aluminum so that they are rounded and smooth. It is a good idea to wrap some tape or dip the ends in plastic coating to keep from snagging the tent.
5. Install clevis with speed nut
6. Go 'Nesting!
